Product Information

HYGIENE BARRIER AISI 304 Single

Product features:
-Shoe soles are only roughly cleaned with a dry curly hygiene mop. For hand disinfection, 2 hands are simultaneously inserted into 2 separate chambers on the front of the machine.
The solution is sprayed as soon as it is detected by the sensors. There are Red/Green LED warning lights that indicate that the process has been completed and completed. Person’s hand disinfection
After the procedure, permission is given at the turnstile.
• Dry curly mop for cleaning shoe soles and disinfection of hands are carried out simultaneously. MADE FROM 304 CR STAINLESS MATERIAL. HYGIENE
THE MAT IS AVAILABLE. The Hygiene Mat can be easily changed if desired. It provides hygiene quickly and efficiently in any location needed in the facility. Easily portable
and can be installed at any desired location. Mandatory hand disinfection is provided for two hands simultaneously, and the hand disinfection time can be adjusted.
• It does not ALLOW one-handed passage.
• There is an adjustable turnstile lock according to exit direction and preference, turnstile duration can be adjusted.
• Approximate dimensions 86.5 cm (length) x 60 CM (width) x140 CM (height)
• 304 CR Stainless Steel railing is available.
• FREE PASSAGE WHEN THERE IS NO ELECTRICITY.
• There are height adjustable legs.
• There is a stainless carrying plate for disinfectant canisters on one side of the device.
IT OPERATES WITH 220 V ELECTRICITY.

HYGIENE BARRIER AISI 304

THIS PRODUCT IS PREFERRED IN PLACES WHERE DETAILED CLEANING IS REQUIRED. DETAILED HAND WASHING WITH THE SINK FOUND ON IT, FLOOR WITH HYGIENE MATS
AFTER PROVIDING DISINFECTANT, DOUBLE HAND DISINFECT IS MADE AND GRANTED PASSAGE PERMIT.
• Dry curly mop for cleaning shoe soles, WASHING HANDS
FOR Disinfecting the sink and hands occurs simultaneously.
• MADE OF 304 CR STAINLESS MATERIAL.
• A HYGIENE MAT IS AVAILABLE. A Hygiene Mat is easily available upon request.
replaceable.
• Provides hygiene quickly and efficiently in any location needed in the facility.
THERE IS A SEQUENTIAL SYSTEM.
SENSOR SINK
SOAP DISH
NAPKIN HOLDER
TRASH CAN
DOUBLE HAND DISINFECTING UNIT (OPTIONAL JET DRYING)
STAFF FIRST TAKING SOAP, WASHING HAND, AFTER DOING THEIR OPERATIONS.
The hand is simultaneously inserted into 2 separate chambers on the front of the machine, the hands are detected by sensors.
The solution is sprayed as soon as it is detected. Red/ indicating that the transaction is done and completed.
There are green LED warning lights. After the person’s hand disinfection process, the tourniquet
Passage permit is given, IF THIS ORDER IS MISSED THERE IS NO PASSAGE PERMIT.
• It does not ALLOW one-handed passage.
• Approximate dimensions 256 cm (length) INCLUDING FEET x 100 CM (width) x152 CM (height)
• 304 CR Stainless Steel railing is available.
• FREE PASSAGE WHEN THERE IS NO ELECTRICITY.
• There are height adjustable legs.
• There is a stainless carrying plate for disinfectant canisters on one side of the device.

TRIPOD TURNSTILES

Operation: Adjustable manual switching in both directions
Body: 1.2 mm thick 304 quality stainless steel.
Optional: 430 quality stainless steel or electrostatic powder coating with different color options.
Handles: Ø38 mm diameter aluminium or different colour options with electrostatic powder coating.
IP Class: IP54 (Op. IP56)
Operating Temperature: Between (-20°C) and (+68°C) Op: -50°C with heater.
Functions: Switching time adjustable, adjustable switching directions, audible alarm, led alarm
Emergency: In case of all kinds of disasters and emergencies, the handles run idle. (Optional: Drop arm)
Power Supply: 110/220V – 50/60 Hz AC (%10 +-)
Power Consumption: 24V DC standby 12W max 60W 7W max 14W. Power supply system (SMPS) with the feature of filtering
fluctuations likely to occur in electrical lines
Transition Range: 470mm – 520mm
Safety Level: Deterrent
Indicators: Bidirectional double colour led panel
Accessories: Heater, battery unit, dry contact or systems that can be controlled by any voltage between TTL CMOS 5-48V.
Control System: Compatible with all kinds of Access control units and token systems. Opt. Functions can be controlled with
RS232-485 or LAN (network)

Leave a Reply